Getting your carpets cleaned is a job that fits on the same range as housecleaning: it’s not relaxing, but it’s required, and it should be done on a regular basis. The majority of carpet owners, on the other hand, will only have their carpets washed once every few years. Carpet cleaning is essential for more than just stain removal. Cleaning your carpet will boost and extend the life of your carpet.
How Often Should You Clean Your Carpet?
Manufacturers suggest getting your carpet washed every 12–18 months, to make sure it stays pleasing and working well for as long as possible. In reality, several warranties require you to clean your carpet on a regular basis; make sure to check your warranty information carefully.
Hot Water Extraction and So-Called “Steam Cleaning”
The most popular form of carpet cleaning suggested by most carpet companies is hot water extraction, also known as steam cleaning. Hot water is sprayed on the carpet and then drawn back into the system, along with any residue that’s on the carpet. A cleaning solution is normally applied to the water to aid in the extraction of marks and soiling.
This is not to be confused with real steam cleaning. However, it is now generally agreed that the word “steam cleaning” simply refers to the most popular carpet cleaning method, hot water extraction.
Professional Carpet Steam Cleaning
A truck-mounted unit or a mobile system may be used by skilled cleaners. The mobile system has clear advantages, such as the ability to be used in small places and apartment buildings in areas where a truck-mounted unit’s hose would otherwise be inaccessible. Truck-mounted units, on the other hand, are more efficient than mobile units and, for optimum performance, should be used wherever possible.
DIY Carpet Steam Cleaning
With far too many various machines available on the market, it’s easy to consider if you can save money and do the job yourself instead of hiring a specialist.
A small cleaner could be a worthwhile investment to have on hand if your home is susceptible to spills or injuries that are hard to clean. However, for a more thorough cleaning of your entire carpet board, hiring a professional is highly recommended.
Risks of DIY
DIY machines usually don’t really heat water to much the same high temperature as professional machines, resulting in less efficient washing. Furthermore, these devices are not as efficient as those used by professionals, because they are unable to remove as much water from the carpet. The carpet will only be damp after it’s been washed properly.
Wet carpet suggests that the machine was insufficiently powerful to complete the task. If your carpet is still damp after washing, use fans to make the drying process faster and make sure you don’t walk on it until it’s completely dry. Start replacing the furniture only after the carpet has fully dried.
Other factors, including the volume of carpet shampoo applied to the machine and the procedure for operating the machine, including how quick or slow to travel through the carpet, provide many possibilities for stuff to go incorrectly with DIY devices, or at least not as well as experienced cleaners.
If the expense of hiring a professional to wash your carpets is a problem, consider getting just the “traffic areas” cleaned. This ensures that the cleaner can actually go around your large furniture pieces, such as the couch, bed, and so on. Not only is the carpet beneath these massive furniture pieces not visible, but it is also not prone to the same levels of air, noise, and foot traffic compared to the other parts of the carpet, so it ’s okay that it doesn’t need to be cleaned as often. Of course, if you switch your furniture around constantly, it’s probably better to get the entire surface washed. If you just have the high-traffic areas cleaned, you’ll save money.